PlumX Metrics
Embed PlumX Metrics

High performance dielectric composites by latex compounding of graphene oxide-encapsulated carbon nanosphere hybrids with XNBR

Journal of Materials Chemistry A, ISSN: 2050-7496, Vol: 2, Issue: 29, Page: 11144-11154
2014
  • 90
    Citations
  • 0
    Usage
  • 34
    Captures
  • 0
    Mentions
  • 0
    Social Media
Metric Options:   Counts1 Year3 Year

Metrics Details

  • Citations
    90
    • Citation Indexes
      90
  • Captures
    34

Article Description

A novel dielectric composite with high dielectric constant (k), low dielectric loss, low elastic modulus and large actuated strain at a low electric field was prepared by a simple, low-cost and efficient method. The graphene oxide nanosheet (GO)-encapsulated carbon nanosphere (GO@CNS) hybrids were fabricated for the first time via π-π interaction and hydrogen bonding interaction by simply mixing the CNS and GO suspension. The assembly of GO@CNS hybrids around rubber latex particles was realized by hydrogen bonding interaction between carboxylated nitrile rubber (XNBR) and GO@CNS hybrids during latex compounding. The thermally reduced GO (RGO)@CNS/XNBR composites were then obtained from GO@CNS/XNBR by vulcanization and in situ thermal reduction, resulting in the formation of a segregated filler network. The results showed that k at 10 Hz obviously increased from 28 for pure XNBR to 400 for the composite with 0.75 vol% of the hybrids because of the formation of a segregated filler network and the increased interfacial polarization ability of the hybrids after in situ partial thermal reduction. Meanwhile, the composite with 0.75 vol% of the hybrids retained low conductivity (10 S m), resulting in low dielectric loss (<0.65 at 10 Hz). In addition, the elastic modulus only mildly increased with the addition of 0.75 vol% of the hybrids, retaining the good flexibility of the composites. More interestingly, the actuated strain at 7 kV mm obviously increased from 2.69% for pure XNBR to 5.68% for the composite with 0.5 vol% of RGO@CNS, and the actuated strain at a lower electric field (2 kV mm ) largely increased from 0.23% for pure XNBR to 3.06% for the composite with 0.75 vol% of RGO@CNS, which is much higher than that of other dielectric elastomers reported in previous studies, facilitating the application of the dielectric elastomer in biological and medical fields, where a low electric field is required. © 2014 the Partner Organisations.

Provide Feedback

Have ideas for a new metric? Would you like to see something else here?Let us know