The total energy and the total entropy of force signals — new parameters for monitoring oblique turning operations

Citation data:

International Journal of Machine Tools and Manufacture, ISSN: 0890-6955, Vol: 40, Issue: 13, Page: 1879-1897

Publication Year:
2000
Usage 36
Abstract Views 36
Captures 3
Readers 3
Citations 10
Citation Indexes 10
Repository URL:
https://ro.uow.edu.au/engpapers/1181; https://works.bepress.com/dsaini/11
DOI:
10.1016/s0890-6955(00)00032-8
Author(s):
Chungchoo, C; Saini, Devi P
Publisher(s):
Elsevier BV
Tags:
Engineering; oblique; monitoring; operations; total; force; totat; energy; turning; parameters; signals; entropy
article description
In unmanned CNC turning operations, the accuracy of tool wear predictions is very important for accurate tool replacement policies and avoiding unnecessary tool insert changes. This paper introduces two new parameters, namely the total energy and the total entropy of force signals, for tool condition monitoring. The correlation between the new parameters, tool wear and a wide range of cutting conditions is examined. The experimental results show that the energy of force signal can be reliably used to monitor tool flank and crater wear over a wide range of cutting conditions. However, the total entropy of forces does not appear to be sensitive to feed rate, rake angle and tool wear. The experimental results also indicate that crater wear causes an increase in the effective rake angle resulting in lower total energy of forces. For some particular shapes of worn tool, however, the crater wear results in a decreased rake angle which increases the total energy of forces. The influence of crater wear on forces and the root mean square of acoustic emission (AErms) signals is also observed in this research.