Spark discharge coupled laser multicharged ion source.

Citation data:

The Review of scientific instruments, ISSN: 1089-7623, Vol: 86, Issue: 7, Page: 073304

Publication Year:
2015
Usage 54
Downloads 25
Abstract Views 24
Full Text Views 5
Captures 7
Readers 7
Citations 4
Citation Indexes 4
Repository URL:
https://digitalcommons.odu.edu/ece_fac_pubs/92
PMID:
26233369
DOI:
10.1063/1.4923457
Author(s):
Shaim, Md. Haider A.; Elsayed-Ali, Hani E.
Publisher(s):
AIP Publishing
Tags:
Physics and Astronomy; Capacitors; Electric discharges; Ion sources; Laser ablation; Laser produced plasmas; Laser pulses; Plasma interactions; Spark discharge; Electrical and Electronics; Plasma and Beam Physics
article description
A spark discharge is coupled to a laser multicharged ion source to enhance ion generation. The laser plasma triggers a spark discharge with electrodes located in front of the ablated target. For an aluminum target, the spark discharge results in significant enhancement in the generation of multicharged ions along with higher charge states than observed with the laser source alone. When a Nd:YAG laser pulse (wavelength 1064 nm, pulse width 7.4 ns, pulse energy 72 mJ, laser spot area on target 0.0024 cm(2)) is used, the total multicharged ions detected by a Faraday cup is 1.0 nC with charge state up to Al(3+). When the spark amplification stage is used (0.1 μF capacitor charged to 5.0 kV), the total charge measured increases by a factor of ∼9 with up to Al(6+) charge observed. Using laser pulse energy of 45 mJ, charge amplification by a factor of ∼13 was observed for a capacitor voltage of 4.5 kV. The spark discharge increases the multicharged ion generation without increasing target ablation, which solely results from the laser pulse. This allows for increased multicharged ion generation with relatively low laser energy pulses and less damage to the surface of the target.