Characterization of Thin Flexure Hinges for Precision Applications Based on First Eigenfrequency
Mechanisms and Machine Science, ISSN: 2211-0992, Vol: 96, Page: 15-24
2021
- 3Citations
- 1Captures
Metric Options: CountsSelecting the 1-year or 3-year option will change the metrics count to percentiles, illustrating how an article or review compares to other articles or reviews within the selected time period in the same journal. Selecting the 1-year option compares the metrics against other articles/reviews that were also published in the same calendar year. Selecting the 3-year option compares the metrics against other articles/reviews that were also published in the same calendar year plus the two years prior.
Example: if you select the 1-year option for an article published in 2019 and a metric category shows 90%, that means that the article or review is performing better than 90% of the other articles/reviews published in that journal in 2019. If you select the 3-year option for the same article published in 2019 and the metric category shows 90%, that means that the article or review is performing better than 90% of the other articles/reviews published in that journal in 2019, 2018 and 2017.
Citation Benchmarking is provided by Scopus and SciVal and is different from the metrics context provided by PlumX Metrics.
Example: if you select the 1-year option for an article published in 2019 and a metric category shows 90%, that means that the article or review is performing better than 90% of the other articles/reviews published in that journal in 2019. If you select the 3-year option for the same article published in 2019 and the metric category shows 90%, that means that the article or review is performing better than 90% of the other articles/reviews published in that journal in 2019, 2018 and 2017.
Citation Benchmarking is provided by Scopus and SciVal and is different from the metrics context provided by PlumX Metrics.
Conference Paper Description
Flexure hinges with small cross-section heights are state of the art in numerous precision engineering applications due to their capability for smooth and repeatable motion. However, the high sensitivity to manufacturing influences represents a challenge. We propose a characterization method for flexure hinges based on the measurement of the free oscillation, to enable the consideration of manufacturing influences in the early stages of the design process. Three semi-circular flexure hinges with different cross-section heights and highly accurate geometry were investigated experimentally to compare them with three theoretical modeling approaches. The results for the three flexure hinge specimens showed small deviations to the predicted values from the models which is in agreement with the results of dimensional measurements. With each modeling approach, a deviation of the minimal notch height from the nominal value can be calculated. This value, in turn, can be used as manufacturing allowance for subsequent manufacturing of compliant mechanisms using the same manufacturing method. An exemplary compliant parallel-crank mechanism proves the applicability of the concept to compliant mechanisms with multiple flexure hinges.
Bibliographic Details
http://www.scopus.com/inward/record.url?partnerID=HzOxMe3b&scp=85092905035&origin=inward; http://dx.doi.org/10.1007/978-3-030-61652-6_2; http://link.springer.com/10.1007/978-3-030-61652-6_2; http://link.springer.com/content/pdf/10.1007/978-3-030-61652-6_2; https://dx.doi.org/10.1007/978-3-030-61652-6_2; https://link.springer.com/chapter/10.1007/978-3-030-61652-6_2
Springer Science and Business Media LLC
Provide Feedback
Have ideas for a new metric? Would you like to see something else here?Let us know