Production of activated carbons from Quercus cerris acorn shell under various experiment conditions, and their characterizations

Due to the high porosities, large surface areas, insolubilities in solutions, and unique structural and morphological structures, porous materials are utilized in various application areas such as energy conversion and storage, wastewater treatment, adsorption, catalysis and photocatalysis. In this study, activated carbons (QCACs), one type of porous materials, were synthesized from Quercus cerris acorn shells by using ZnCl chemical activation under various production conditions. The effects of carbonization temperature, carbonization period, and impregnation ratios on the yields, surface areas, pore developments, and N adsorption–desorption isotherms of activated carbons obtained were investigated in detail. The highest surface area (1751.61 m/g) was reached when utilized at the impregnation ratio of 2.0 at 500 ℃ for 90 min. The total pore volume of QCAC increased with increasing impregnation ratio, however the micropore volume of QCAC reduced. It was found from the pore distribution data that QCACs contained mostly narrow mesopores and a little amount of micropores. Also, N adsorption–desorption isotherm data revealed that QCACs produced under different conditions were usually mesopore structures, and the pores were narrow slit-shaped. Moreover, the data provided from SEM, FTIR, Boehm titration, and elemental analysis gave more characterization information about QCACs synthesized.