PlumX Metrics
Embed PlumX Metrics

Unveiling the Structure Sensitivity for Direct Conversion of Syngas to C2-Oxygenates with a Multicomponent-Promoted Rh Catalyst

Catalysis Letters, ISSN: 1572-879X, Vol: 150, Issue: 2, Page: 482-492
2020
  • 5
    Citations
  • 0
    Usage
  • 16
    Captures
  • 0
    Mentions
  • 0
    Social Media
Metric Options:   Counts1 Year3 Year

Metrics Details

Article Description

Abstract: Mn and Li promoted Rh catalysts supported on SiO with a thin TiO layer were synthesized by stepwise incipient wetness impregnation approach. The thin TiO layer on the surface of SiO was proved to stabilize those small Rh nanoparticles and hinder their agglomeration. The reducibility of Rh on these catalysts depends on Rh particle size as well as the position of manganese oxide, and large Rh nanoparticles with MnO on Rh nanoparticles can be only reduced at an elevated temperature. Catalyst with large Rh particles exhibits a higher CO conversion and higher products selectivity towards long chain hydrocarbons and C2-oxygenates at the expense of decreasing methane formation than a similar catalyst with smaller Rh particles. This was attributed to the synergistic effect of Mn and Li promotion and molar ratio between Rh and Rh sites on the surface of Rh nanoparticles. Moreover, Rh nanoparticles on MnO are proved to be more efficient in promoting hydrogenation of acetaldehyde to ethanol than its counterpart with MnO on Rh nanoparticles. Finally, in order to target high C2-oxygenates selectivity, low reaction temperature together with a low H/CO ratio in the feed is recommended. Graphic Abstract: [Figure not available: see fulltext.].

Bibliographic Details

Xiaohui Sun; Harrie Jansma; Dmitrii Osadchii; Bart van der Linden; Michiel Makkee; Toshihito Miyama; Rasika Dasanayake Sanjeewa Aluthge; Kenichi Shinmei; Noritoshi Yagihashi; Haruka Nishiyama

Springer Science and Business Media LLC

Chemical Engineering; Chemistry

Provide Feedback

Have ideas for a new metric? Would you like to see something else here?Let us know