PlumX Metrics
Embed PlumX Metrics

Fabrication of a high-performance poly-Si thin-film transistor using a poly-Si film prepared by silicide-enhanced rapid thermal annealing process

Electronic Materials Letters, ISSN: 2093-6788, Vol: 10, Issue: 6, Page: 1081-1085
2014
  • 0
    Citations
  • 0
    Usage
  • 3
    Captures
  • 0
    Mentions
  • 0
    Social Media
Metric Options:   Counts1 Year3 Year

Metrics Details

Article Description

A 50-nm thick polycrystalline Si film was fabricated by the crystallization of anamorphous Si film using silicide-enhanced rapid thermal annealing (SERTA). The amorphous Si film was deposited on a 5-nm thick polycrystalline Si seed layer containing nickel silicide precipitates in grain boundary areas. With the help of the silicide precipitates, the RTA temperature decreased from 730 to 680°C and the grain size of the crystallized polycrystalline Si film increased to 1.4 — 2.2 μm. Few defects were found within the grains and the Ni concentration in the polycrystalline film decreased to 1 × 10 cm due to the very-thin seed layer that contained nickel silicide precipitates. As a result, the field-effect hole mobility in the p-channel poly-Si thin film transistors (TFTs), fabricated employing the polycrystalline Si film, was as high as 169 cm/V∙s at a drain voltage of V = −0.1 V; the subthreshold swing was as small as 0.24 V/decade. The minimum leakage current at V= 5V was 1.5 × 10 A with very good diode characteristics.[Figure not available: see fulltext.].

Provide Feedback

Have ideas for a new metric? Would you like to see something else here?Let us know