Analysis on roles of thermal radiation to evaporation and combustion of fuel droplets

Thermal radiation is a significant mode of energy transmission besides conduction and convection in most combustion systems. Accurate treatment of thermal radiation is a crucial element for predicting the flame structure and pollutant formation. However, thermal radiation to fuel droplet evaporation is often neglected in the numerical simulations of two-phase spray combustion systems. In this paper, computational analysis on the thermal radiation to evaporation and combustion of fuel droplets in two-phase spray combustion is conducted. The influence of flame radiation on droplet evaporation and combustion is studied by adding radiation source term to the energy equation describing droplet evaporation process. Radiation transfer equation is solved, in which the radiation of CO 2, H 2 O and soot is imposed to consider radiation effect of the flame. The partially premixed combustion model is employed, in which radiation heat transfer between droplet and ambient gases is taken into account. A reduced chemical reaction mechanism for n-heptane consisting of 76 species and 349 reactions is used. Four different numerical setups have been used and compared, and the simulation results coincide with the experiment data in terms of spray statistics and flame shapes. The peak flame temperature increases by 28 K when the radiative heat source term in the evaporation process is considered. The droplet evaporation is significantly enhanced by thermal radiation, leading to a promotion of 34.8% in C 7 H 16 concentration in the center region of combustor. The concentration of combustion products, such as H 2 O and CO 2, increases by 13.2% in the reaction region.