Research on the resilience model of a new prefabricated shear wall structure

Based on high-strength bolts, steel plates and other components to achieve the advantages of prefabricated shear wall assembly connection “dry connection” operation advantages, a new type of assembled shear wall with friction energy consumption function was proposed. Using a combination of model tests and numerical simulations, three shear wall specimens with a scaling ratio of 1:1.54 were designed and the corresponding seismic performance tests were carried out. The effects of axial compression ratio and longitudinal reinforcement rate of edge members on the damage mode, hysteresis performance, load carrying capacity, deformation performance, stiffness degradation and energy dissipation capacity of specimens are systematically analyzed. The test results showed that the final failure modes of the three specimens were similar, which was the bending-shear failure from the development of the oblique cracks in the wall to the concrete spalling in the compression zone; The reduction of the axial compression ratio or the reinforcement rate of the longitudinal reinforcement of the edge members will lead to the reduction of the bearing capacity of the shear wall and the increase of the ultimate displacement has a negative impact on the seismic performance of the new assembled shear wall, which is manifested by the weakening of the hysteresis performance and the reduction of the ultimate bearing capacity. Combined with the finite element simulation results, the five-fold skeleton model and restoring force model of the new assembled shear wall were established, and then the calculation formulae of unloading stiffness and loading stiffness of the hysteresis curve were obtained by regression fitting. The restoring force model proposed in this paper is in good agreement with the test results, which can provide a reference for the elastic–plastic seismic response analysis of the new fabricated shear wall structure.