Comparative study of stress characteristics around the adjacent teeth tissues during insertion of mini-screws with different insertion angles: A three-dimensional finite element study

With a limited alveolar bone position, there is a high risk that mini-screws (MS) implants could cause damage to the adjacent teeth. To reduce this damage, the position and tilt angle of the MS must be optimized. The aim of this study was to assess the effect of MS implantation angle on the stress exerted on adjacent periodontal membrane and roots. A three-dimensional finite element model containing dentition, periodontal ligament, jaw and MS were established based on the CBCT images and MS scanning data. The MS was first inserted perpendicular to the surface of the bone at specific locations and then tilted at an angle of 10° and 20° to the mesial and distal teeth, respectively. The stress distribution in the periodontal tissue of the adjacent teeth was analyzed after MS implantation at different angles.The stress on the adjacent tooth root and periodontal ligament was most uniformly distributed when the MS was inserted vertically. It changed 9.4–97.7% when the axis of MS was tilted at 10-degree and 20-degree angles from the point of vertical insertion. The stresses experienced by the periodontal ligament and the root are similar. When the horizontal angle of the MS insertion was changed, the MS was closer to the adjacent tooth, resulting in greater stress near the PDL and root. It was recommended to insert the MS vertically into the alveolar bone surface to avoid root damage due to excessive stress.