Electrochemical characteristic analysis for surface passivation layer of galena and chalcopyrite in acid corrosion
Minerals Engineering, ISSN: 0892-6875, Vol: 199, Page: 108129
2023
- 7Citations
- 4Captures
Metric Options: Counts1 Year3 YearSelecting the 1-year or 3-year option will change the metrics count to percentiles, illustrating how an article or review compares to other articles or reviews within the selected time period in the same journal. Selecting the 1-year option compares the metrics against other articles/reviews that were also published in the same calendar year. Selecting the 3-year option compares the metrics against other articles/reviews that were also published in the same calendar year plus the two years prior.
Example: if you select the 1-year option for an article published in 2019 and a metric category shows 90%, that means that the article or review is performing better than 90% of the other articles/reviews published in that journal in 2019. If you select the 3-year option for the same article published in 2019 and the metric category shows 90%, that means that the article or review is performing better than 90% of the other articles/reviews published in that journal in 2019, 2018 and 2017.
Citation Benchmarking is provided by Scopus and SciVal and is different from the metrics context provided by PlumX Metrics.
Example: if you select the 1-year option for an article published in 2019 and a metric category shows 90%, that means that the article or review is performing better than 90% of the other articles/reviews published in that journal in 2019. If you select the 3-year option for the same article published in 2019 and the metric category shows 90%, that means that the article or review is performing better than 90% of the other articles/reviews published in that journal in 2019, 2018 and 2017.
Citation Benchmarking is provided by Scopus and SciVal and is different from the metrics context provided by PlumX Metrics.
Article Description
The surface passivation layer of galena and chalcopyrite after sulfuric acid corrosion can enlarge the difference in their floatability. The floatability test shows that sulfuric acid corrosion strongly inhibits galena’s floatability but has no effect on chalcopyrite. Scanning electron microscope and energy dispersive spectrometer (SEM-EDS), X-ray photoelectron spectroscopy (XPS) and Eh-pH diagram analysis showed that the galena surface was oxidized to form a coarse passivation layer of PbSO 4, while the chalcopyrite surface dissolved only a small amount of Fe 2+ ions and formed a dense sulfide layer (Cu (1-x) Fe (1-y) S 2 ). Open circuit potential (OCP), polarization curve, and electrochemical impedance spectroscopy (EIS) were used to investigate the electrochemical characteristics of the surface passivation layer on galena and chalcopyrite after sulfuric acid corrosion. The electrochemical analysis results showed that the electrostatic potential increased and the electrochemical activity decreased on the galena and chalcopyrite surface due to corrosion action; the current density of corroded galena was stable around 17.41 μA · cm −2 and the surface oxidation reaction can be further carried out, while the current density of corroded chalcopyrite was reduced from 17.91μA · cm −2 to 9.01 μA · cm −2, and the surface reaction was gradually inhibited; the double electric layer resistance (R t ) and the resistance (R p ) for the passivation layer of corroded galena both decreased significantly, and the passivation layer could be further generated from the surface to the interior, while the Rt and Rp of corroded chalcopyrite increased significantly and prevented the dissolution of internal components. The electrochemical analysis results were consistent with each other and confirmed by SEM-EDS and XPS conclusion. In addition, the corrosion-flotation process has been used to achieve high-efficiency separation of the galena-chalcopyrite mixture.
Bibliographic Details
http://www.sciencedirect.com/science/article/pii/S0892687523001437; http://dx.doi.org/10.1016/j.mineng.2023.108129; http://www.scopus.com/inward/record.url?partnerID=HzOxMe3b&scp=85158830118&origin=inward; https://linkinghub.elsevier.com/retrieve/pii/S0892687523001437; https://dx.doi.org/10.1016/j.mineng.2023.108129
Elsevier BV
Provide Feedback
Have ideas for a new metric? Would you like to see something else here?Let us know