PlumX Metrics
Embed PlumX Metrics

Enhanced oxidation stability and proton conductivity of sulfonated poly(arylene ether ketone sulfone)s via embedment of surface-modified ceria nanoparticles

Process Safety and Environmental Protection, ISSN: 0957-5820, Vol: 185, Page: 480-491
2024
  • 4
    Citations
  • 0
    Usage
  • 7
    Captures
  • 0
    Mentions
  • 0
    Social Media
Metric Options:   Counts1 Year3 Year

Metrics Details

Article Description

Sulfonated poly(arylene ether ketone sulfone)s (SPAEKS) were prepared by polycondensation reaction as polymer matrix. Dopamine hydrochloride was sulfonated and then modified onto the surface of the ceria (CeO 2 ) nanoparticles. The sulfonated dopamine ceria (SPD@CeO 2 ) was added to the polymer matrix as an inorganic nanofiller to prepare a series of composite membranes. The structure and morphology of modified inorganic nanoparticles and membranes were characterized and analyzed by means of SEM, 1 H NMR, PXRD and FTIR. Among all the composite membranes obtained, S-SPD@CeO 2 -2 (the quality of the SPD@CeO 2 percentage was 2%) had the most outstanding comprehensive performance. Oxidative stability of S-SPD@CeO 2 -2 reached 95.33% due to the free radical scavenging effect of CeO 2. At 80 °C, 100% relative humidity (RH), the proton conductivity of S-SPD@CeO 2 -2 was 218.93 mS cm −1. Meanwhile, this membrane also had good mechanical property (Young's modulus was 1332.59 MPa) and dimensional stability (swelling ratio was 34.34% at 80 °C). Besides, the maximum power density and open circuit voltage (OCV) of S-SPD@CeO 2 -2 membranes reached 445.48 mW cm −2 and 0.917 V. Both of the above results were better than pure membranes (304.45 mW cm −2 and 0.872 V). Comprehensive the above data, S-SPD@CeO 2 -2 had considerable potential for application as fuel cell diaphragm.

Provide Feedback

Have ideas for a new metric? Would you like to see something else here?Let us know