Comparative study on water vapour resistance of poly(Lactic acid) films prepared by blending, filling and surface deposit
Membranes, ISSN: 2077-0375, Vol: 11, Issue: 12
2021
- 7Citations
- 33Captures
- 1Mentions
Metric Options: Counts1 Year3 YearSelecting the 1-year or 3-year option will change the metrics count to percentiles, illustrating how an article or review compares to other articles or reviews within the selected time period in the same journal. Selecting the 1-year option compares the metrics against other articles/reviews that were also published in the same calendar year. Selecting the 3-year option compares the metrics against other articles/reviews that were also published in the same calendar year plus the two years prior.
Example: if you select the 1-year option for an article published in 2019 and a metric category shows 90%, that means that the article or review is performing better than 90% of the other articles/reviews published in that journal in 2019. If you select the 3-year option for the same article published in 2019 and the metric category shows 90%, that means that the article or review is performing better than 90% of the other articles/reviews published in that journal in 2019, 2018 and 2017.
Citation Benchmarking is provided by Scopus and SciVal and is different from the metrics context provided by PlumX Metrics.
Example: if you select the 1-year option for an article published in 2019 and a metric category shows 90%, that means that the article or review is performing better than 90% of the other articles/reviews published in that journal in 2019. If you select the 3-year option for the same article published in 2019 and the metric category shows 90%, that means that the article or review is performing better than 90% of the other articles/reviews published in that journal in 2019, 2018 and 2017.
Citation Benchmarking is provided by Scopus and SciVal and is different from the metrics context provided by PlumX Metrics.
Metrics Details
- Citations7
- Citation Indexes7
- CrossRef5
- Captures33
- Readers33
- 33
- Mentions1
- Blog Mentions1
- Blog1
Article Description
The polylactic acid (PLA) resin Ingeo 4032D was selected as the research object, with a focus on PLA modification by using polymers such as linear low-density polyethylene (LLDPE), high-density polyethylene (HDPE) and ethylene–propylene-diene monomer grafted with glycidyl methacrylate (EPDM-g-GMA), by using fillers such as nano calciumcarbonate and zeolite. In order to characterize the deposition effect of Al2O3 on the film surface by plasma-assisted atomic layer deposition, Bio-oriented PLA (BOPLA) with more uniform thickness than blown film was purchased for study. The mechanical properties, friction coefficient, surface contact angle and water vapour transmission rate of the modified PLA film were compared and discussed. The aim was to find out the most influencing factors of film’s water vapour resistance.
Bibliographic Details
MDPI AG
Provide Feedback
Have ideas for a new metric? Would you like to see something else here?Let us know