PlumX Metrics
Embed PlumX Metrics

Design and fabrication of a 2-axis electrothermal MEMS micro-scanner for optical coherence tomography

Micromachines, ISSN: 2072-666X, Vol: 8, Issue: 5
2017
  • 25
    Citations
  • 0
    Usage
  • 30
    Captures
  • 0
    Mentions
  • 0
    Social Media
Metric Options:   Counts1 Year3 Year

Metrics Details

  • Citations
    25
    • Citation Indexes
      25
  • Captures
    30

Article Description

This paper introduces an optical 2-axis Micro Electro-Mechanical System (MEMS) micromirror actuated by a pair of electrothermal actuators and a set of passive torsion bars. The actuated element is a dual-reflective circular mirror plate of 1mm in diameter. This inner mirror plate is connected to a rigid frame via a pair of torsion bars in two diametrically opposite ends located on the rotation axis. A pair of electrothermal bimorphs generates a force onto the perpendicular free ends of the mirror plate in the same angular direction. An array of electrothermal bimorph cantilevers deflects the rigid frame around a working angle of 45° for side-view scan. The performed scans reach large mechanical angles of 32° for the frame and 22° for the in-frame mirror. We denote three resonant main modes, pure flexion of the frame at 205 Hz, a pure torsion of the mirror plate at 1.286 kHz and coupled mode of combined flexion and torsion at 1.588 kHz. The micro device was fabricated through successive stacks of materials onto a silicon-on-insulator wafer and the patterned deposition on the back-side of the dual-reflective mirror is achieved through a dry film photoresist photolithography process.

Bibliographic Details

Quentin A.A. Tanguy; Sylwester Bargiel; Nicolas Passilly; Magali Barthès; Olivier Gaiffe; Jaroslaw Rutkowski; Philippe Lutz; Christophe Gorecki; Huikai Xie

MDPI AG

Engineering

Provide Feedback

Have ideas for a new metric? Would you like to see something else here?Let us know